English
Español
Deutsch
Français
Português
Русский
عربي
Melayu
Indonesia
Tiếng Việt
FilipinoWhat should I do when the LCD display screen of the touch integrated advertising machine can't be calibrated
Following Guangzhou Ruiguan technicians, we will introduce the reasons why the LCD display touch screen of the touch-integrated advertising machine can't be calibrated.
Only by finding the problem correctly can we solve the problem better.
1. It may be caused by the reason that the LCD touch screen control card of the advertising machine did not receive the operation signal, so it can be used after power failure and restart.
2. After the equipment is used for a period of time, the reflective stripes around the LCD screen of the advertising machine are covered with dust, wiped with a dry soft cloth, and then can be used after power failure and restart.
Solution:
1. If the LCD display touch screen of the touch screen integrated advertising machine cannot be calibrated due to the problem of receiving signals, the device needs to be powered off and restarted for calculation, and then it can be used again.
2. When the installation of the LCD display touch screen driver of the advertising machine is abnormal, it is necessary to delete the touch screen driver from the Add/Remove program at the control panel, and then turn off the power to restart the LCD display screen of the touch integrated advertising machine for calibration again.
